CNC Plasma and Oxy Fuel Cutting Machine in Manesar, Haryana

CNC Plasma and Oxy Fuel Cutting Machine in Manesar, Haryana

  • Home
  • >
  • CNC Plasma and Oxy Fuel Cutting Machine in Manesar, Haryana
🔥 Dual Technology | Plasma + Oxy Fuel | One Machine Two Cuts

CNC Plasma and Oxy Fuel Cutting Machine in Manesar, Haryana

One Machine | Two Technologies | Unlimited Possibilities | Serving IMT Manesar & Gurugram

Need a CNC plasma and oxy fuel cutting machine in Manesar, Haryana? Shri Shyam Engg Works brings you a dual-technology CNC cutting solution that handles everything – from thin sheets to thick plates. As a trusted manufacturer and supplier, we deliver heavy-duty combo machines perfect for Manesar's diverse fabrication industry, including IMT Manesar, Gurugram, Dharuhera, Bawal, and Rewari.

200mm+
Oxy Fuel Cutting Thickness
25mm
Plasma Cutting Capacity
2 in 1
Dual Technology
50+
Installations in Haryana-NCR

Plasma vs Oxy Fuel – Why Get Both in One Machine?

Feature Plasma Cutting Oxy Fuel Cutting
Best for thickness Up to 25mm 20mm to 200mm+
Cutting speed Very fast (up to 5000mm/min) Slow (100-500mm/min)
Material types Mild steel, SS, Al, Copper Mild steel, Carbon steel only
Cut quality Smooth, minimal slag Rough, needs cleaning
Operating cost Higher (electricity + consumables) Lower (gas + oxygen)

With our CNC plasma and oxy fuel cutting machine in Manesar, you switch between both technologies seamlessly – use plasma for speed on thin sheets, oxy fuel for heavy plates.

Key Features of Our Dual-Technology CNC Machine

🔄 Auto Tool Change

Seamless switching between plasma torch and oxy fuel head.

🎯 Independent THC

Separate torch height control for plasma and oxy fuel.

⚙️ Heavy-Duty Rack & Pinion

German design drive system for smooth motion on thick plates.

💨 High-Speed Plasma

Up to 12000 mm/min rapids for thin sheet fabrication.

🔥 Multi-Flame Oxy Torch

Pre-heat + cutting oxygen for clean edge on thick steel.

📊 Nesting Software Included

Advanced CAD/CAM support for complex shape cutting.

Where Manesar & NCR Industries Use This Combo Machine?

🏭 Heavy Engineering Units

Cutting 50mm+ plates for machinery frames in IMT Manesar & Gurugram

🏗️ Structural Steel Fabrication

Beams, columns, and channels for infrastructure projects

🚂 Railway & Defense Suppliers

Thick plate components for NCR's defense sector

🛢️ Pressure Vessel Manufacturers

Precision edge preparation

🚜 Earthmoving Equipment

Bucket, boom, and chassis parts for JCB, Caterpillar suppliers

🔄 Scrap & Dismantling Yards

Cutting heavy sections quickly

Technical Specifications

Cutting areaCustomizable from 2000mm x 4000mm to 4000mm x 12000mm
Plasma source100A to 300A (Hypertherm / compatible)
Oxy fuel gasLPG / Acetylene + Oxygen with multi-nozzle torch
Drive systemHelical rack & pinion with servo motors
ControllerIndustrial CNC with color touch screen, USB, Ethernet
Rail typeHeavy-duty linear guides with ground rails

📍 We Serve These Industrial Areas in Manesar & NCR

Manesar IMT Manesar Gurugram Dharuhera Bawal Rewari Bhiwadi Sohna Pataudi Taoru Faridabad Palwal Nuh

✅ Dedicated service team in Manesar & Gurugram | ✅ On-site installation | ✅ Spare parts available | ✅ Our Faridabad factory is just 60 minutes away

Frequently Asked Questions – Manesar & NCR Customers

Q: What thickness can oxy fuel cut on this machine?
A: With proper gas setup, we can cut up to 300mm thick mild steel plates.
Q: Can I use both plasma and oxy fuel in the same program?
A: Yes, the CNC controller supports automatic tool change – you can program plasma for thin parts and oxy for thick parts in one file.
Q: What gases are needed for oxy fuel?
A: LPG or Acetylene for pre-heating + Oxygen for cutting. We can supply gas regulators and hoses.
Q: What is the warranty?
A: 24 months on mechanical structure + 12 months on electrical components + 6 months on plasma source.
Q: Do you provide installation and training in Manesar?
A: Yes, our engineer visits for 5-7 days of installation, calibration, and operator training for both technologies. We can reach Manesar within 1-2 hours.
Q: Is there service support in Manesar?
A: Yes, our service team from Faridabad can reach Manesar, IMT Manesar, and Gurugram within 1-2 hours.

Why Shri Shyam Engg Works for Combo Machine in Manesar?

🏭 In-House Manufacturing

Complete fabrication of gantry, bed, and rail system in our Faridabad factory.

🔧 Dual Technology Experts

10+ years experience in integrating plasma + oxy fuel systems.

📍 Located in Faridabad (Near Manesar)

Our Faridabad factory is just 60 minutes from Manesar – fastest service in the region.

💰 Best Price Guarantee

Direct manufacturer pricing – no middleman markup.

🎓 Free Training

On-site operator training for both plasma and oxy fuel cutting.

🔄 Consumables Supply

Electrodes, nozzles, and gas regulators always in stock.

Get Quote – CNC Plasma & Oxy Fuel in Manesar

Tell us your cutting thickness and sheet size – we'll recommend the perfect combo machine.

⭐ Visit our Faridabad factory (just 60 minutes from Manesar) | See a working combo machine in Manesar at our client's site