- Plot 16, gali no 7w saroorpur industrial area Faridabad - 121004
- +91 – 9891963990
- info@shrishyamenggworks.com
Air Plasma Cutting Machine in Manesar, Haryana
Air Plasma Cutting Machine in Manesar, Haryana
Lowest Operating Cost | Perfect for Small Workshops & Job Work | Serving IMT Manesar & Gurugram
Looking for an air plasma cutting machine in Manesar, Haryana that won't burn a hole in your pocket? Shri Shyam Engg Works brings you compressed air plasma cutters – no expensive oxygen, no nitrogen cylinders. Just connect your workshop compressor and start cutting. Perfect for small fabrication units, gate making workshops, and job work centers in Manesar, IMT Manesar, Gurugram, Dharuhera, Bawal, and Rewari.
What Makes Air Plasma Different?
Traditional plasma cutters need expensive gases like oxygen or nitrogen. Air plasma cutting machine uses shop compressed air – same air your pneumatic tools use. The air is compressed, dried, and fed directly to the plasma torch. That's it.
💰 Cost Comparison – Air Plasma vs Gas Plasma (Per 8 Hour Shift)
Key Features of Our Air Plasma Cutting Machine
💨 Compressed Air Operated
No gas cylinders, no refilling hassle. Runs on 60-100 PSI shop air.
⚡ High-Frequency Start
Non-high frequency start – no interference with CNC controller.
🔧 Built-In Air Filter
Moisture separator + air dryer included for clean dry air.
📱 Digital Display
Real-time current, air pressure, and fault diagnosis.
🛡️ Overload Protection
Automatic shutdown on voltage fluctuation or overheating.
🎮 CNC Ready Interface
Standard CPC port – connect to any CNC or handheld use.
What Can You Cut with Air Plasma in Manesar & NCR?
🔘 Mild Steel
Up to 25mm clean cut, 30mm severance cut
✨ Stainless Steel
Up to 20mm with nice finish
🔘 Aluminum
Up to 18mm, no dross on thin sheets
🟡 Copper & Brass
Up to 12mm for electrical components
📀 Galvanized Sheets
No toxic fumes like oxy fuel
Perfect for Manesar & NCR's Small Workshops
🏪 Gate & Railing Makers
Cut decorative patterns, arch designs, and nameplates without expensive tooling.
🔩 Job Work Centers
Take plasma cutting contracts – low investment, quick returns.
🚗 Auto Repair Shops
Cut chassis parts, brackets, and repair patches on demand.
🏠 Home Fabricators
Portable units available – take it to site for installation work.
Technical Specifications – Air Plasma Range
📍 We Serve These Industrial Areas in Manesar & NCR
✅ Free delivery to Manesar | ✅ Demo available | ✅ Spare parts in stock | ✅ Our Faridabad factory is just 60 minutes away
Frequently Asked Questions – Manesar & NCR Customers
A: A 2HP or 3HP compressor with 5-8 CFM at 70-90 PSI is sufficient. We also sell small silent compressors if needed.
A: Yes, air plasma cuts stainless steel very well. For mirror finish, you may want nitrogen, but air gives good clean cuts.
A: 1 year on plasma source + 6 months on torch.
A: Yes, all our air plasma units have CPC port – plug and play with any CNC controller.
A: Yes, we can send our engineer for installation and training. Small units also have video support. We can reach Manesar within 1-2 hours.
A: Yes, our service team from Faridabad can reach Manesar, IMT Manesar, and Gurugram within 1-2 hours.
Why Shri Shyam Engg Works for Air Plasma in Manesar?
🔌 Complete Package
Air plasma source + torch + consumables + air filter unit – everything included.
🧪 Demo on Your Material
Bring your sheet to our Faridabad factory (just 60 minutes from Manesar) or ask for on-site demo.
📦 Consumables in Stock
Electrodes, nozzles, swirl rings – always available at our Faridabad warehouse.
🔧 1 Year Warranty
Full warranty on plasma source + 6 months on torch.
📞 Phone Support
WhatsApp video call support for troubleshooting.
💰 EMI Options
Low-cost financing available for small workshop owners.
Get Best Price – Air Plasma in Manesar
Tell us your cutting thickness and budget – we have the right air plasma for you.
⭐ Lowest price air plasma cutter in Manesar | EMI available | Free installation